Quick Start for Combat Robot

1. Startup Preparation

1.1 Battery Charging

  • Before starting the robot, the battery needs to be charged first. Connect the battery to the power adapter turn on the power to start charging.

充电

  • Fully Charged Indication

The power adapter indicator lights show, two red lights always on indicate charging; two green lights always on indicate fully charged.

Charging Fully Charged
充电 充满电
  • Low Battery Indication

During the use of the robot, if a “beep-beep” sound is emitted and the power indicator (red light) flashes, this is a low-battery alarm. Please charge the battery in time to avoid battery failure due to over-discharging.

[!CAUTION]

Before charging, turn off the robot’s power switch.

  • Robot Charging Time and Usage Duration

The robot is factory-equipped with an AC-3S10 balance charger with 1A output.

The combat robot has a battery capacity of 1500mAh, taking about 1.5 hours to fully charge and lasting for approximately 20 minutes.

1.2 Accessory Assembly

  • Install the wireless handle receiver into the USB port of the main board.
  • Insert two AAA batteries into the PS2 remote control handle. Note that the remote control switch should be set to the “OFF” position.
wireless handle receiver PS2 remote control handle
手柄接收器 手柄背面

1.3 Startup Precautions

Before starting the robot, spread its hands and feet apart, place it face down on the ground.

开机前

2. Power On

2.1 Power-On Sequence

  1. Turn on the robot’s power switch.
  2. Turn on the remote control handle switch; the green indicator light changes from flashing to steady on.
  3. If neither the red nor green indicator light is on, press the START button on the handle to activate it.

2.2 Indicator Light Description

Handle Not Activated Handle Connected Successfully Bluetooth Not Connected
Neither the red nor green indicator light is on The green indicator light changes from flashing to steady on Both the red and green indicator lights are flashing

3. Remote Control Handle Operation Instructions

手柄按键定义

Name Button Press Button Long Press Button Release
Pre-forward Forward Stand
Left Jump Turn Stand Stand
Right Jump Turn Stand Stand
Pre-forward Backward Stand
Front Fall & Stand Stand Stand
Right Side Slide Right Side Slide Stand
Left Side Slide Left Side Slide Stand
× Back Fall & Stand Stand Stand
L1 Left Straight Punch Stand Stand
L2 Left Hook Stand Stand
L3 Forward Roll Forward Roll Stand
R1 Right Straight Punch Stand Stand
R2 Right Hook Stand Stand
R3 Defend Defend Stand

Article Directory