Quick Start for Combat Robot
Quick Start for Combat Robot 1. Startup Preparation 1.1 Battery Charging Before starting the robot, the battery needs to be charged first. Connect the battery to the power adapter turn on the power to start charging. Fully Charged Indication The power adapter indicator lights show, two red lights always on indicate charging; two green lights […]
Introduction to Combat Robot
Introduction to Combat Robot 1. Product Overview 1.1 Brief Introduction The 15-axis humanoid combat robot (Model: HR-02) features a high-strength aluminum alloy frame and is equipped with 15 distributed serial bus servos with a maximum torque of 45KG. After the control board is powered on, it automatically assigns servo IDs, eliminating the need for manual […]
Frequently Asked Questions
Frequently Asked Questions 1. Solutions for Servo Not Detected 1.1 Confirm Connection Sequence First, turn on the power switch on the robot control board (the red power indicator light will illuminate). Then connect the smaller end of the USB cable to the control board and the other end to the computer. Finally, launch the PC […]
预设动作组的添加
Adding Preset Motion Groups 1. Download and Installation of PC Motion Editor Software Download the DBSP Serial Servo PC Motion Editor. Extract the downloaded file and install the software to any location for immediate use. [!NOTE] Disable antivirus software such as 360 before installation, as it may block the Develop.exe program. 2. Connection Between Robot […]
机器人基本动作的创建
机器人基本动作的创建文章