Integrating with Other Open‑Source Platforms

This page aggregates open‑source resources for the Atom series (code, structure, sample projects, etc.).

• 👉 Want to run Python AI? Use Raspberry Pi.
• 👉 Want IoT control? Use ESP32.
• 👉 Want low‑level control? Use STM32 or Arduino.

1. Safety & Notes

• Before power‑on, double‑check Servo and power wiring to avoid reverse connection/shorts.
• For the first power‑on, start with lower motion speed; verify joint directions and zero positions step by step.

2. Recommendations

• Validate at least one motion using the Web/PC Configuration Software first, then integrate with your own controller program.
• When adding sensors, confirm power and logic levels (3.3 V / 5 V) first.

3. Related Docs